Machine accessories, vice, dividing head, vise, collet chuck and rotary table
We have in stock new and used machine vices, dividing heads, collet chucks, angle plates, collets,
rotary tables, clamp kits etc.
| Stock Item | Description |
|
|
Coolant Pump and Tank Coolant Pump and Steel Tank with coolant Hose.
|
|
|
Used Turret Attatchment Used Turret Attatchment to suit Cholchester Mascot Lathe.
|
|
|
Bar Milling Vice Bar Milling Vice, Capacity Up to 150mm Diameter Bar or Pipe, Jaws are 160mm Wide.
|
|
|
Narex NT30 Boring Head Narex NT30 Boring and Facing Head.
|
|
|
Used Collet Chuck Used Burnerd collet chuck and collets. Collet chuck has a D1-6 mount. Collet range 4-38mm.
|
|
|
BT50 Boring Head BT50 Boring Head with Boring Bar.
|
|
|
R8 UFB-3 Boring Head Kuroda R8 UFB-3 Bridgeport Boring and Facing Head with Boring Bars, Made in Japan.
|
|
|
SIP Rotary Table SIP Rotoptic 800mm Motorised Rotary Table.
|
|
|
MPA Drilling Head Used MPA Adjustable Multi-Spindle Drilling Head, 8 spindles 2Morse Taper .
|
|
|
Mews Indexing Head Used Mews Indexing Head Vertical and Horizontal comes with Adjustable Tailstock, 3 Jaw Chuck 170mm Diameter, Center Height 130mm, Made in Japan.
|
|
|
TOS Milling Machine Vertical Head TOS NT40 spindle. Stepped up single swivel. Vertical Milling Head.
|
|
|
Wanderer Milling Machine Vertical Head Wanderer Vertical Milling Machine Head, NT50 Male to NT50 Female, Right Angle Head.
|
|
|
Eclipse Magnetic chuck Eclipse Magnetic Chuck 450mm x 150mm, Fine pole.
|
|
|
Enerpac Hydraulic clamps Enerpac Hydraulic clamps, swing clamps, Limited Stock .
|
|
|
Deckel KF3S Deckel KF3S Fixed Table for Pantograph, Tee-Slotted Work area 1200mm x 640mm.
|
|
|
Deckel FP3L Deckel FP3L Supplementary Table for Milling Machine, Tee-Slotted Work area 1000mm x 260mm.
|
|
|
Deckel FP3 Deckel FP3 Fixed Table for Milling Machine, Tee-Slotted Work area 800mm x 460mm.
|
|
|
Deckel FP1 Deckel FP1 Tilting Swivel Table for Milling Machine, Tee-Slotted Work area 500mm x 225mm.
|
|
|
Dawn Drill Vice Dawn Adjustable Drill Vice. 125mm Wide Jaws. 250mm Maximum opening.
|
|
|
Used Brobo Waldown Twin Spindle Head Used Brobo Waldown Twin spindle Drill Head with Tapping chucks.Model-VC 20. 2 Morse Taper Mount.
|
|
|
Topslide and Toolpost Used Topslide and Toolpost to suit Large Lathe, Toolpost 200mm x 200mm, Topslide 700mm x 280mm.
|
|
|
Jones and Shipman Bench Centers Used Jones and Shipman Bench centers 900mm between centers.
|
|
|
Jones and Shipman Radius Attachment Jones and Shipman Radius wheel Forming Attachment, Model UX.8004 and UX.8004/5.
|
|
|
SIP Tilting Rotary Table Used SIP JIg Borer Tilting Rotary Table 450mm diameter,Made in Switzerland.
|
|
|
Forkardt 400mm Forkardt 3 Jaw Chuck,400mm Diameter,100mm Bore, D1-11 Camlock Mount.
|
|
|
Kitagawa HOS-15 Kitagawa HOS-15, 3 Jaw Power Chuck, 380mm Diameter, 120mm Bore.
|
|
|
Kitagawa AS06 Kitagawa AS06, 3 Jaw Air Operatered Power Chuck, 165mm Diameter.
|
|
|
Redhead Spindle Redhead Motorised Spindle 3Phase.
|
|
|
NT50 Dividing Head NT50 Taper Dividing Head, 125mm Center Height.
|
|
|
Mecca Dividing Head Mecca Dividing Head with Tailstock and change gears, 125mm Center Height.
|
|
|
NT50 Speed Increaser NT50 Taper Speed Increaser with 5 Collets, Hyper Spindle NT Tool Japan.
|
|
|
Boneham and Turner Jig Boring Head Boneham and Turner Jig Boring Head, 4 Morse Taper, Head Diameter 93mm .
|
Melbourne Australia Copyright © 2006 Apex Machinery Pty Ltd
